Industrial-data-systems IDS DT200 Manual do Utilizador descarregar pdf (Página 26)

4.5.3 TEST SERIAL OUT1

Activate the SELF TEST menu and press the ENTER key when the DT210 displays

'TEST SERIAL OUT1'.

The DT210 prompts: "ENTER TEST DATA".

Enter up to 16 characters of data via the DT210 keyboard. Press the ENTER key. The DT210

transmits the test data out its serial channel #1.

NOTE: If the error message "NOT CLR TO SEND" appears the data can not be transmitted

because the handshake signal (CTS Pin #5 on DB25 connector) is low. Connect to the printer

handshake signal or connect to pin 20 on DT210.

Press the ENTER key to re-transmit the test data or press the CONTINUE key to enter new test

data.

4.5.4 TEST SERIAL OUT2

Activate the SELF TEST menu and press the ENTER key when the DT210 displays

'TEST SERIAL OUT2'.

DT210 prompts: "ENTER TEST DATA".

Enter up to 16 characters of data via the DT210 keyboard. Press the ENTER key. The DT210

transmits the test data out its serial channel #2.

NOTE: If the error message "NOT CLR TO SEND" appears the data can not be transmitted

because the handshake signal (CTS Pin #5 on DB25 connector) is low. Connect to the printer

handshake signal or connect to pin 20 on DT210.

Press the ENTER key to re-transmit the test data or press the CONTINUE key to enter new test

data.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Sem comentários

Industrial-data-systems IDS DT200 Manual do Utilizador Página 26